If you like something of a visual treat then Bargello quilts are such ones. Once you begin to admire the craft that goes to make a Bargello quilt you will remember always admire this quilt type.

It's easy to make and also like a treasure. Beginners can be a surprise when they realize that it is easy to do and the results are felt proud. Even basic knowledge of operating a rotary cutter to align with a ruler and general knowledge of using a machine sewing, sewing a point ahead specifically.

This art of Bargello making is easy and you should try that soon. This is what we must do —

list of items you need:

* A Standard sewing machine

* Sewing needles – size usually 12

* Iron

* A Rotary Cutter

* Spray starch

* Needles

* Pins head of accounts

* To cut

* The material for the tissues may be in 7 different colors (normal and hard copy)

* Quilt Batting

* Material for binding borders.

* Rotary ruler

Material border junction

instructions to:

1. A single color would not be bad in all colors may have multiple exaggerated effect. As cotton is the best bet. Cloth used for binding purpose should be of contrasting color, and will ease the border appears. Prewash the fabric, dry and iron with starch.

2. Keep everything as simple pattern and design in order to avoid problems later in creation. A wave pattern will be easy. This is what will be done by a wave pattern. It also helps to cushion the software can be useful.

3. The strips have to cut three and a half inches in length of fabric, cut strips 3.5 inches wide web. Fabric sometimes face you and then cut strips of 2.5 inches from each tissue. Cut the fabric at a time if you are a beginner.

4. Since then sew the fabric strips to join them, use a ¼ "gap seam and 15 points every inch. This gives a space of three inches wide at the end of the strip. Put some weight on the fabric, the seam that will sit in order, and then the fabric will remain steady.

5. Now let's cut the strips too. Place the fabric on some mat type where you can cut. Take a step three inches and trim the strip to the measurements to get the strips in color blocks. You will find it difficult to join the bands so it should be more easy to adopt an appropriate and then cut needs accurately.

6. Take the strips and put them on a board so that the material of the band 2 is a square below the first. Do this for 5 times and again until the session time, then put the 6th strip parallel, seventh above the square session. Now put more strips of counting up the number ten in ascending order.

The line played like this from 1 to 5 in order decline, 5 and 6 in parallel and 7 to 10 in increasing order. When stacked together it gives you a wave. Repeat this as many times as you want.

7. Stich then the strips in order. which makes their rebuilding. then apply the batting and then fabric backpack. qulilting on the quilt to be done, around each squareso that lyers are in place after each layer is correct. Then cut theimproper borders and apply the binding around the fabric clean.

That's it! that's it.

About the Author:

Discover free
how to make bargello quilting
instructions and
beginner kit quilting
guide at

http://www.quilthowto.com
, written by experienced crafter, Jennifer Walter.

Article Source: ArticlesBase.com – Beginner Quilting – Learn the Art of Bargello Quilt

Quilt Binding: Joining Ends, Marci Baker of Alicia’s Attic